Full Product Manual

Status Beep Set
The Status Beep Set allows you to turn on/off the built-in speaker
for the LEDs in diagnostic testing. Different audio tones correspond
to different LED lamps. This function is invaluable when working in
areas where LED illumination alone is not sufficient.
•The default setting is Beep On.
1. From System Setup screen, use the Up/Down scroll button
to select Status Beep Set and press the OK button.
2. From Status Beep Set menu, use the Up/Down scroll button
to select Beep ON or Beep OFF to turn on/off the beep.
3. Press the OK button to save your selection
and return to previous menu.
Status Beep Set 1/2
Beep ON
Beep OFF ?
Figure 3.8
[e-mail]
24
1-800-348-5004