Installation Guide

10
Remove aerator assembly and flush out debris.
Reinstall aerator assembly.
7 8 9
Fix the horizontal rod through the
metal clip and lift rod strap.
Tighten the screw in the strap
onto the lift rod.
Install the lift rod to the pup up.
321
4
Apply teflontape to the thread
on the drain.
5 6
Install the drain plug assembly and
the movable rod assembly into the
pop-up assembly.
Thread Teflon Tape
Slide drain trim and plug into drain hole
and secure from below.
Installation/Installation/Instalación
Lower spout into mounting hole. Carefully tighten spout nut to
secure spout.
Revised 12-2018 Revised 12-2018
UF56600
UF56603
UF56605
UF56607
Connect the hose.