User's Manual
Table Of Contents
- XIDi printerp2-6.pdf
- Checking accessories
- Handling of transfer film, ink ribbons and cards
- Set-up 11
- Connecting the power cord
- Installing the card stacker
- Setting the ink ribbon
- Setting the retransfer film
- Connecting with a host computer 22
- Before use
- Operation display LED 23 LCD panel
- Operation display LED contents and the LCD panel
13
Connecting the power cord
1. Check the plug.
• For AC 120V type • For AC220-240V type
(North America) (Europe)
* The detached power cords vary according to model
and country of purchase.
2. Plug the power cable into the printer.
Plug the power cable of the laminator if it is installed.
Always use a grounded power outlet.
Never share the outlet with other electrical equipment.
Use an AVR (Automatic Voltage Regulator) if there
is a possibility of voltage fluctuation. Use an
uninterruptible power source rather than an AVR if
there is the possibility of uninterruptible power
source.
CAUTION
Set-up (continued)