User manual

Telephone Voice Recording System

Page|23



Hide screen after startup: When this option is enabled, after startup the system will hide the main soft-

ware interface. It will only show a small icon with "LOGON" on the top left

screen. Click "LOGON" and enter the User ID and Password to logon and

full screen will appear. Default Value: Disabled.

Recorder Server IP address: is support the Monitor listening channels by the local area network

Can use the Recorder-Player tools running on each PC be checking& playing the voice

file.

Sound Card Voice Amplification: Adjust the volume level when playing back through the sound card.

Default Value: 2.0

Beep interval when record (in seconds): Set the interval (in seconds), for example if you set 5 seconds,

it beeps at an interval of every 5 seconds.

Allowable Minimum Recording Length(s): If a call is less than the Minimum Recording seconds, then it

will not be recorded. Default value: 15 seconds.

Cancel Record Command: You can press a key or a combination of keys on the phone to cancel the

current recording. Default Value: #99#

Key Mode: Key-code for Starting Rec. – By pressing Default Value: *

Key Mode: Key-code for Stopping Rec. Default Value: #

The default key for recording is * and

pressing # ends the recording.