User`s manual

DS-7200/DS-7300/DS-8100 Series DVR USER’S MANUAL

Using the Display Menu

The Display Menu can be accessed by right-clicking the mouse on any of the display in Live Feed mode. The

Display menu, shown in Figure 18 allows you to quickly change into different display modes and to start/stop

auto-switching of the display modes.

Figure 18. Live Feed Display Menu

2x2 Mode: Click to switch to four channel display mode.

3x3 Mode: Click to switch to nine channel display mode.

4x4 Mode: Click to switch to sixteen channel display mode.

Main Menu: Click to go to DVR Main Menu. If Lock Main Menu is

selected in the Lock Menus menu, you must enter the current

Admin Password to exit out of the Live Feed.

Start/Stop Auto-Switch: Click to start/stop auto-switch.

Auto-switch will cycle through selected cameras. Switching of

camera can be on an individual or multiple camera basis.

Next Set of Display: next set of display. In 2x2 mode, this will

Click to view the show the next four display. In 3x3 mode, this

will show the next nine display.

Note: In order to use auto-switching of channels, the dwell time must be configured in the Display Configuration

menu.