User`s manual

DS-7200/DS-7300/DS-8100 Series DVR USER’S MANUAL

The settings you may adjust with each display includes:

• Picture Settings: Settings for the brightness, contrast, saturation and hue of selected display. To adjust the

picture settings of a display:

1. Select display.

2. Click the Picture Settings icon. This will bring up the Picture Settings menu, as shown in .Figure 15.

Figure 15. Picture Settings Menu

3. Increase/decrease amount for brightness, contrast, saturation and hue. The affect will be displayed

immediately on the screen.

4. Click the Close icon to save the settings and return to the Live Feed mode.

• PTZ Control: If the selected camera is a PTZ camera, you may control it directly from the display. To control a

PTZ camera:

1. Select display that corresponds to a PTZ camera.

2. Click the PTZ Control icon. This will bring up additional PTZ control buttons, as shown in Figure 16.

Figure 16. PTZ Control Mode

3. Control the PTZ using PTZ control buttons. Pan and tilt PTZ by clicking on the directional buttons. Zoom in

and out using the Zoom In/Out buttons and recall presets, patrols and patterns by clicking the number next to

the corresponding icons.

4. Click the Close icon to return to Live Feed mode.

Note: PTZ parameters for the camera must be set correctly before the PTZ can be controlled.

Note: A maximum of five presets, patrols and patterns can be displayed on this interface. More presets, patrols

and patterns can be recalled in the PTZ Configuration menu.

• Audio: Enable/disable audio for selected display. To enable or disable audio:

1. Select display to enable/disable audio.

2. Enable audio by clicking the Enable Audio icon and disable audio by clicking the Disable Audio icon. An

error message similar to the one shown in Figure 17 will pop up if the Enable Audio option is not selected in the

Display Configuration menu for the specified channel.