User`s manual

DS-7200/DS-7300/DS-8100 Series DVR USER’S MANUAL

Watching a Live Feed

The Live Feed mode is automatically started after the DVR boots up. It is also at the very top of the menu

hierarchy, thus hitting the ESC button multiple times (depending on which menu you’re on) will bring you to the

Live Feed mode.

Understanding Live Feed Icons

There are multiple icons on each display in Live Feed mode to indicate different camera status and settings.

These icons include:

Event Icon: Indicates video loss or tampering, motion detection and /or sensor alarm.

Record Icon: Indicates the current channel is recording. There cording may have been started

manually, from a schedule, and/or triggered from motion or alarm.

Picture Settings Icon: Adjust picture settings for selected display.

PTZ Control Icon: Enter PTZ control mode for the selected display.

Preset Icon: Recall PTZ preset.

Patrol Icon: Recall PTZ patrol.

Tour Icon: Recall PTZ tour.

Zoom In/Zoom Out: Zoom in/out with PTZ.

Full Screen/Exit Full Screen Icon: Enter into/exit out of full screen mode for selected display.

Audio On/Audio Off Icon: Enable/disable audio for selected display.

Close Icon: Exit out of current setting and return to previous mode.

Figure 13. Live Feed Icons

Note: Status for video loss is only valid with analog cameras. Event icons will only be displayed when armed,

except for the video loss alarm.

Operating the Live Feed

In Live Feed mode, you may adjust the settings for individual cameras by left-clicking on the desired display with

the mouse.. The selected display will be surrounded with a green border, as shown in Figure 14 .

Figure 14. Live Feed Mode