User`s manual

DS-7200/DS-7300/DS-8100 Series DVR USER’S MANUAL

 HDD: HDD indicator blinks red when data is being read from or written to HDD.

 Tx/Rx: Tx/Rx indictor blinks blue when network connection is functioning properly.

3. Control Buttons:

 MENU/WIPER Button: Pressing the MENU/WIPER button will return the user to the Main menu (after

successful login). In PTZ Control mode, the MENU/WIPER button will start wiper (if applicable). In

Playback mode, it also can be used to enable/disable side bar menu.

 F1/LIGHT: In PTZ Control mode, it will turn on/off PTZ light. In PTZ Control mode, the F1/LIGHT button is

used to zoom the PTZ camera in when in the PTZ Control menu.

 F2/AUX: It is used to cycle through tab pages. In PTZ Control mode, the F2/AUX button is used to zoom the

PTZ camera out when in the PTZ Control menu.

 ESC: The ESC button is used to escape to the previous menu and to arm/disarm the DVR in Preview mode.

 EDIT/IRIS+: The EDIT/IRIS+ button is used to edit text fields. When editing text fields, it will also function as

a Backspace button to delete the character in front of the cursor. On checkbox fields, pressing the

EDIT/IRIS+ button will tick the checkbox. In PTZ Control mode, the EDIT/IRIS+ button opens up the iris of

the camera.

 PLAY/AUTO: The PLAY/AUTO button is used to enter the Playback menu. It is also used to turn audio on/off

in the Playback menu and auto scan in the PTZ Control menu.

 REC/SHOT: The REC/SHOT button is used to enter the Quick Schedule Configuration interface. If used when

controlling a PTZ, pressing the REC/SHOT button and then a Numeric button will call a PTZ preset.

 PTZ/IRIS-: The PTZ/IRIS- button is used to enter the PTZ Control mode. When in the PTZ Control mode, it is

used to close the iris of the PTZ. In Playback mode, it also can be used to enable/disable audio.

 PREV/FOCUS-: The PREV/FOCUS- button is used to switch between single screen and multi-screen mode. In

PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button.

 A/FOCUS+: The A/FOCUS+ button is used to adjust focus in the PTZ Control menu. It is also used to switch

between input methods (upper and lowercase alphabet, symbols and numeric input).

 SHIFT: The SHIFT button is used for switch button action between numeric button and control button.

4. DIRECTION/ENTER Buttons:

 DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items in

menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. In

Preview mode, these buttons can be used to cycle through channels.

 ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can also be used

to tick checkbox fields. In Playback mode, it can be used to play or pause the video.

5. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a menu. In the

Playback mode, the inner ring can be used to speed up/slow down the video. In Preview mode, it can be used to

cycle through different channels.

6. POWER Button: The POWER button is used for power on or power off the DVR.

Figure 3-5: DS-8100-S Series

Figure 3-6: DS-8100-SE Series