Specifications

Quick Operation Guide of DS-7200-SH/SV Series DVR

5. Click Next button which takes you back to the Network Setup Wizard window.

Set the network parameters, including the NIC type, IPv4 address, IPv4 subnet mask, default gateway, etc.

You can enable the DHCP to automatically obtain an IP address and other network settings from that server.

6. Click Next button to enter the HDD Management window.

To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.

7. Click Next button to enter the Record Settings window.

1) Select the camera to configure.

2) Check the checkbox to enable Start Recording.

3) Select the recording mode to Normal or Motion Detection.