User guide
Before attaching the Text Module to the DVR, please check if the Text Module package contains the items
listed below.
Main Board Text Module:
1. Text Module x1
2. USB Cable x1
3. Screws x4
4. Y-cable x1
FOLLOW THE STEPS BELOW TO INSTALL THE TEXT MODULE.
STEP 1
Unscrew the DVR’s cover plate removing screws from the
top and side of the lid and remove it from the unit, as
shown in the images.
Refer to the figures below for the designation of each
connector on the Main Board and Text Module.
Text Module Installation
SET UP OF CONNECTED DEVICES