Specifications

ALIMAK 34596 - 1 /01
Important Safety Instructions
Over the years serious accidents have occurred during the
erection and dismantling of rack and pinion hoists. Common to
these accidents has been the ”human factor”, i.e. non adherence
to proper safety procedures and common sense.
This document affects the personnel involved in the erection,
dismantling and servicing of such equipment.
Some examples:
Leaning over the safety railing on the car roof while the hoist is
moving upwards can cause you to be struck by a tie, counter-
weight or a cable guide.
Incomplete installation of mast bolts can cause separation of the
mast sections, leading to the fall of the car with subsequent loss
of life or serious injuries.
Avoid the risk of accidents by carefully studying these instruc-
tions regularly. Think clearly! Do not rush the work and always
check to make certain that the work is being done properly.
SAFETY FIRST!
Safety instructions
Local safety regulations
– All local regulations shall apply.
Weather conditions – Installation outdoors
– Do not erect or dismantle hoists if wind speed exceeds
12.5 m/s. (28 mph) or as governed by local regulations
where more stringent.
Preparation
– Read and understand the Instruction Manual before the
work begins.
– Barricade or rope off the area before erecting or dismantling.
– No admittance to the hoist car by unauthorized personnel
during erection or dismantling by unauthorized personnel.
Safety equipment and protective clothing
– Prescribed safety equipment and clothing such as hard hat,
safety shoes, safety belt, etc. shall be used.
– Loose fitting clothes such as scarves must not be used as
they might become entangled in moving parts.
c 2
c 1
C 1