Specifications

e 20
Resetting the safety device
If the safety device trips during normal operation, a careful
check must be made of the motor brake(s), transmissions,
pinion, rack and all guide and counter rollers by trained/
authorized service personnel, before the safety device can be
reset. The cause of the tripping must be determined and
rectified.
The safety device may be reset after a drop test, without having
to carry out the checks listed above.
WARNING!
Falling hazard
Never reset the safety device above ground landing.
Can cause severe injury or death.
Exchange intervals, see sign on safety device!
A socket intended for a 3/4’’ drive ratchet comes with the
Scando 650 hoist delivery to simplefy the safety device’s resetting
procedure.
An drive extension tube further simplify the procedure.
(The 3/4’’ drive ratchet is NOT a part of the hoist delivery).
ALIMAK 34625_A - 1 /08
E 20
Rating plate on the safety device