Specifications
Side roller for single motor drive unit
The side roller must be adjusted when it is level with a
horizontal frame of the mast.
3. Loosen the side roller and center the drive unit parallel on
the mast tubes with the upper left side roller.
Setting of overload sensing system
Set the overload sensing system to trip at full load and additional
10% overload.
For more detailed information refer to separate manual P/N
9081 539 - sub.
ALIMAK 34622A - 1 /09
E 13
Signals from the load cells are transferred
to the OSD 4 amplier located in M-panel