Specifications

Service and maintenance
In order to avoid unnecessary breakdowns, those responsible for
the service and maintenance of this equipment must regularly
ensure that all scheduled maintenance work is carried out at the
recommended intervals according to the maintenance program
below.
Adjustments and replacement as a result of inspection, must be
carried out by trained/authorized service personnel.
Only ALIMAK Genuine Spare Parts must be used.
WARNING!
Unintended operation.
Always put the hoist’s ”Normal/Inspection” switch in
Inspection position before carrying out any service
work.
When leaving the car without having completed the
service work or to carry out service, the main switch
must be switched off, locked and tagged.
Failure to follow this warning can cause death or
personal injury.
Service intervals
Intervals based on operating time shall be followed in the first
instance. If the hoist is used only periodically, the first applicable
interval to be reached shall be followed.
Frequent starts and stops!
Service interval 60 hours is based on operation on low rise
buildings, with 4 storeys (approx. 12 m) or less, common in
Sweden and northern Europe.
For 6 storeys (approx. 18 m) or more, corresponding service
intervals can be increased to 120 hours but never exceeding
once a month.
Checklist (log book)
Checklist, with room for notes on maintenance executed, will be
found at the end of this manual. Use it!
Service and maintenance schedule
See the appendix at the end of this manual for bolt tightening
torques.
ALIMAK 34612 - 1 /02
Interval Part Instructions
60 operating 2. Sign plates/ Check that all signs are in position according to the spare parts manual, and
hours or at least instruction that they are legible. Check also that the documentation according to the
once every month manuals documentation box is available.
3. Safety device Check with the user/users if the safety device has been tripping without
cause or if noise can be heard from the device during operation. For further
details, see the instructions for checking wear on the safety device under the
heading ”Adjustment and wear limits”
e 1
E 1