User's Manual

- 12-
Then register the user card. The user shall swipe the admin card first. The
system emits a beep. Then place the card to be registered near the swiping area
within 10 seconds. When the system gives an indication tone, it means that the
user card is registered successfully. When registering the user card, the card to
be registered shall be swiped 10 seconds after the admin card is swiped. Once a
user card is registered, it will postpone for 10 seconds. When there is no activity
for 10 seconds, the system will exit from registration status automatically. To
register a new user card, the user shall swipe the admin card again.
4.SIP Settings
Click the icon "VOIP" on the left side to enter into the following interface:
Proxy: URL of SIP proxy server in format: sip:ip or sip:domain name.
Realm: realm of the device, usually the same as IP or domain name.
User name: refers to the name of the SIP proxy server, provided by the SIP
proxy server administrator.
Password: the password to access the SIP proxy server, provided by the
SIP proxy server administrator.
STUN IP and Port refer to the IP and port of public server for NAT traversal
of audio and video.
Once this is set up, click the key "Submit" to enable new settings.