User's Manual

- 8-
◇ GB/T 18239-2000 "Genericspecificationforintegratedcircuitcardreader”
◇ GA/T 394-2002 "Specifications of access control system"
Expansion tube
Screw
1. Call indoor monitor
In standby mode, press the call button on outdoor panel to call indoor
monitor. During the call, press the call button on outdoor panel again to end the
call. If the call fails or indoor monitor is busy, outdoor panel will emit a beep.
2. Unlocking by access password
Enter the access password(The default is 0000). Then press # key to
confirm. If the password is correct, the door will be unlocked; if not, it will display
“DuDuDu”.
3. Unlocking by IC/ID card
Put the registered IC/ID card on card reader area of the outdoor panel. If
successful, the door will be unlocked.
Basic operation
Package contents
Product executive standard