UIOT/QR4120 《Dual metering socket》 Instruction manual Shanghai Ziguang Lelian Internet of Things Technology Co., Ltd.
Document revision history date version Description Author 2019-10-09 V1.
Dual metering socket 1 Function 1.1 Description 1、Manual power-off function: press the button to switch on and off; 2、Child lock function: After the child lock is turned on, the manual power-off function is disabled (set by the mobile APP); 3、Remote power-off function (operated by mobile APP)； 4、Power-off recovery function: After power-off and poweron, restore the state before power-off (set by mobile APP); 5、Metering function: separately collect 2 output voltages, currents, active power. 2 Structure 2.
2.2 Wiring hole bitmap 2.3 Structure size chart 3 Installation steps 3.1 Installation requirements 1、Installing the cassette requires the US standard dedicated cassette 2、Can’t be installed outdoors 3.2 Installation steps 1、Cut off the mains power； 2、The fire line L, the neutral line N and the ground line E respectively correspond to the corresponding fire line, neutral line and ground line of the inner wall of the wall, and attention should be paid to insulation, and no exposed copper wire is outside.
3、Fix the socket to the cassette on the indoor wall with screws, pay attention to the installation direction; 4、Attach the decorative bone cover to the socket with a screw lock；
5、The product can be installed by assembling the decorative cover to the decorative cover frame through 4 hooks.
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISED CAN ICES-3 (B)/NMB-3(B) Canadian Compliance Statement This device complies with Industry Canada licenseexempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
