Ultimaker 2+ Specification sheet
Specifications Printer and printing properties Technology Print head Build volume Filament diameter Layer resolution XYZ accuracy Print head travel speed Build speed Build plate Build plate temperature Build plate leveling Supported materials Nozzle diameter Nozzle temperature Nozzle heat up time Build plate heat up time Operating sound Connectivity Fused deposition modeling (FDM) Single-extrusion print head with swappable nozzles 223 x 223 x 205 mm 2.85 mm 0.25 mm nozzle: 150 to 60 micron 0.
Ultimaker 2 Extended+ Specification sheet
Specifications Printer and printing properties Technology Print head Build volume Filament diameter Layer resolution XYZ accuracy Print head travel speed Build speed Build plate Build plate temperature Build plate leveling Supported materials Nozzle diameter Nozzle temperature Nozzle heat up time Build plate heat up time Operating sound Connectivity Fused deposition modeling (FDM) Single-extrusion print head with swappable nozzles 223 x 223 x 305 mm 2.85 mm 0.25 mm nozzle: 150 to 60 micron 0.
