Instructions
Ultimaker 2+ Connect user manual 2
Disclaimer
This manual sets out the instructions on how to install and operate the Ultimaker 2+ Connect. Please read and
understand the contents of this installation and user manual carefully. Failure to read the manual may lead to
personal injury, inferior print results or damage to the Ultimaker printer or its peripherals. Always make sure that
anyone who uses this 3D printer knows and understands the contents of the manual to make the most out of
the Ultimaker printer.
Upon delivery of the product, installation shall be done in accordance with the instructions in this user manual. The
handling, storage, use, or disposal of the device are beyond our control and are for your sole responsibility. We do
not assume responsibility and expressly disclaim liability for loss, injuries, damage, or expense arising out of or in
any way connected with the handling, storage, use, or disposal of the product.
The information within this document has been collected and represented with great care and is considered
accurate. In case inconsistencies or inaccuracies are observed those are unintentional and Ultimaker welcomes to
be made aware of those. Submit your feedback to Ultimaker via ‘Submit a request’ at support.ultimaker.com.
Intended use
Ultimaker 3D printers are designed and built for fused lament fabrication with Ultimaker materials mainly within
a commercial, professional, or educational environment. The mixture of precision and speed makes Ultimaker 3D
printers very suitable for concept models, functional prototypes, and small series production.
The Ultimaker 2+ Connect, with its networking capabilities and new touchscreen, delivers single extrusion for
simple applications.
Although we achieved a very high standard in the reproduction of 3D models with the usage of Ultimaker Cura,
the user remains responsible to qualify and validate the application of the printed object for its intended use. This
is especially critical for applications in strictly regulated areas like medical devices and aeronautics. While being
an open material platform, the best results will be achieved with Ultimaker materials, as eort has been made to
match material properties with machine settings.