Instructions
Ultimaker 2+ Connect user manual 11
2.2 Specications
Properties Technology Fused lament fabrication (FFF)
Print head Single extrusion print head with swappable nozzles
Build volume (XYZ) 223 x 220 x 205 mm (8.7 x 8.6 x 8 in)
Nozzle diameter 0.4 mm (included)
0.25 mm, 0.6 mm, 0.8 mm (sold separately)
Layer resolution 0.25 mm nozzle: 150 - 60 micron
0.4 mm nozzle: 200 - 20 micron
0.6 mm nozzle: 300 - 20 micron
0.8 mm nozzle: 600 - 20 micron
XYZ resolution 12.5, 12.5, 2.5 micron
Nozzle temperature 180 - 260
°
C (350 - 500
°
F)
Build speed < 24 mm
3
/s
Build plate Heated glass build plate
Build plate temperature 20 - 110
°
C (60 - 230
°
F)
Operating sound < 50 dBA
Connectivity Wi-Fi, Ethernet, USB port
Physical dimensions Dimensions (with Bowden tube and
spool holder)
342 x 460 x 580 (13.5 x 18.1 x 22.8 in)
Net weight 10.3 kg (22.7 lbs)
Ambient conditions Operating ambient temperature 15 - 32
°
C (32 - 90
°
F)
Non - operating (storage) temperature 0 - 32
°
C (32 - 90
°
F)
Relative humidity 10 - 90% RH non-condensing
Air Manager Filter technology EPA lter
Filter eciency Up to 95% of UFPs
Filter replacement Recommended every 1,500 print hours (approx. 1 year)
Front enclosure Separate front enclosure included with the Air Manager
Electrical requirements Voltage 100 - 240 V AC
Frequency 50 - 60 Hz
Power Max. 221 W
Software Ultimaker Cura Our free print preparation software
Ultimaker Digital Factory Our online printer and print job management solution
Supported OS Windows, MacOS, Linux
Warranty Warranty period 12 months