User Manual Stick Vacuum U�� PRO
Safety Precautions & Warnings IMPORTANT! Always switch off the appliance before cleaning, when not in use or before attempting any maintenance task. The charger must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual. Never operate the vacuum cleaner without filters. Read the manual attentively before using the appliance for the first time.
• Keep openings away from your face and body. • Do not use the vacuum cleaner if it is damaged or broken. If connection cables are damaged, have them replaced immediately. • Never clean the vacuum cleaner or any of the electrical parts, especially the electrical connections, with water or liquid cleaners. • Never attempt to make any modifications electrically to the vacuum cleaner and charging base. • Always store the appliance and charger indoors in a cool and dry place.
About Your Product Congratulations on the purchase of your new Ultenic Stick Vacuum. There are many useful features built into your cleaner and we recommend that you carefully read this instruction manual to take the best advantage of these features. Charging port Battery release button Exhaust filter Battery On/off trigger Boost button Crevice tool Dust bin release button Dust bin Rod release button Dust bin lid release button Dusting brush Rod Wall storage bracket (screws are not included.
Before You Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately. Please read these instructions thoroughly This will ensure you obtain full benefit from your new cleaner.
Product Use Assembly IMPORTANT! Always remove the battery from the appliance before fitting or removing accessories. 1. Insert the power head into the rod. You will hear a "click" sound when it is securely in place. 2. To install the rod, insert the plug end of the rod into the air inlet of the cleaner. Once it is securely in place, you will hear a "click" sound. Inserting the battery 1. Slide the battery into the main unit of the vacuum cleaner. Once it is in place, you will hear a "click" sound. 2.
Instructions for Use Turning on the vacuum Press the on/off button to turn on the vacuum. Switch to boost mode To switch between low power and high power, press the boost button. Charging the vacuum cleaner NOTE: When the charging indicator light flashes during use, the vacuum cleaner battery is running low and requires charging. Insert the charger cable into the battery charging port Charging indicator light: Flashes red: battery require charging.
Accessories Dusting brush The dusting brush can be used as a soft dusting brush for cleaning a variety of surfaces or as an upholstery tool for cleaning furniture. Crevice tool The crevice tool can be used to clean hard-to-reach places or in tight crevices. Power head Ideal for daily cleaning on carpets and hard floors. NOTE: If the power head is blocked, the motor switches off automatically. If this occurs, switch off the vacuum cleaner and remove the battery.
Product Maintenance IMPORTANT! Turn off the cleaner and remove the battery before conducting any maintenance tasks. It is recommended to clean the dust bin after each use or when dust reaches the max fill line. Storage 1. Install the wall storage bracket onto the wall using wall mounting screws (not included). 2. Insert the vacuum cleaner into the wall storage bracket, ensuring it is securely in place. 3. Place the accessories into the corresponding slots on the wall storage bracket.
3. Lift the cyclone filter and release it from the cleaner. 4. To remove the exhaust filter, turn the filter cap anti-clockwise. Then, pull the exhaust filter from the filter cap. NOTE: It is recommended to replace the filters every six months or when they become visibly dirty. Cleaning the roller brush 1. Slide the roller brush release button in the direction of the arrow shown on the button. 2. Gently pull the roller brush out to clean or replace it.
Troubleshooting Problem Cleaner doesn't start Reduced suction The charging indicator light fails to turn blue during charging (led 1 to 3 flashes blue indicates the status of charging) Insufficient application time after charging Light flashes from red to blue intermittently Possible cause Solution Flat battery Charge the vacuum cleaner Filter is blocked Clean or replace the filter The dust bin is full of dust The airway is blocked Empty the dust bin Clear the airway The charger is not fully inserte
Customer Service United States service-us@ultenic.com France service-fr@ultenic.com Deutschland España Canada United Kingdom Italia 日本 Others Shenzhen Ultenic Technology Co.,Ltd 2110, Block B, Building 2, Zhongliangxiangyun, Ailian Community, Longcheng Street, Longgang District, Shenzhen, Guangdong Province, P.R. China service-de@ultenic.com service-es@ultenic.com service-ca@ultenic.com service-uk@ultenic.com service-it@ultenic.com service-jp@ultenic.com support@ultenic.com support@ultenic.
