important Safety instructions To reduce the risk of injury or damage, keep these safety precautions in mind when setting up, using and maintaining your robot vacuum cleaner: » Rend oll safety and repeating instructions before operating your robot. « Retain the safety and operating instructions for future reference, » Pay attention to all warnings on your robot, battery, charging dock and in the user manual, » Follow sit operating Instructions.
« Picking up objects like clothing, loose papers, pull cords far blinds or curtains, power cords, and any fragile objects before using the robot. If the robot passes over a purer cord and drags , objects on table or shelves are Bk sly to fall of. « if the roam to be cleaned contains a balcony, a physical barrier should be used fo prevent frescoes to the balcony snd ensure chats operation. « Da not place anything on top of your robot. » Be aware that the robot naves on its wn.
FOC Statement This device complies with Fart 15 of the FCC Rules. Operation is subject to the following twa conditions: (L)This device may not cause harmful Interference, and (2) this device must accept any Interference received, Including interference that may cause undesired operation. waning: Changes of modifications nat expressly approved by the party responsible for comp acne could void the user's authority to operate the equipment.
About Your Robot 1. What’ sin the Box Robot Vacuum TIE 1x Gusto Empty Base 1x Remote Control 1x Cleaning Brush with Batteries eZ EH 1xSpareWashableMop attachments presidential Lu Spare Hera Sifter with Sponge & 2x Spare Dust Bag quick Start Guide 1x APP User Guide Lx User Manual 2.
LDS cover Charging contacts {with bumper sensor} Dustbin release button Dust collection port Air outlet 2-in-1 dustbin & water tank Power button «Long press to tum on off «Short press to start / pause cleaning Home button + Short press to start/pause recharging Misdirection! wheel Side brush Charging contact pins orchestrate Fight wheel Rolling brush Brush cover © LODE Indicator «Flashing bus light: Powering on/configuring network/upgrading firmware + Slid blue light: Powered on/norms! working state + Flash
3.
5. Remote control Back ta Home Manual Navigation Directional Keys Start Pause sopping Mode Spot Cleaning Mute Decrease Suction Power = Increase Suction Power ® Max suction @ Note: 1. Ibis recommended to point the remote to the grant of the Robot for best results, 2. The remote control range 1s 2-6 meters {10-20 feet). Less than or equal £0 36 meters Using Your Robot 1.
How to place your Auto Empty Base 4 2.5 Inches from the wall Note: 1. Place the Attn Empty Base where the robot can easily access. 2. The Auto Empty Base mist always remain connected to power. Laval using power source that may Inadvertently be switched off. 2.
Domed on the & App Store 1. Download the Utterance app from the App Store (105 devices) or Google Play (Android devices). 2. Open the app and create a user account. 3. Tap the * + can to add the Robot T10 ts your Telegenic account. 4 Follow the instructions in the app to setup the WI-Fi connection. After connecting successfully, you can control your Sabot via the app.
Your Robot is designed to be used regularly. As with most floor care devices, regular use may cause build-up around brushes, in debris compartments and sear filters. We recommend performing regular maintenance, 35 outlined in the following pages, to keep your Robot running at optimal performance. Maintenance and Care 1.
} Replace the main brush and snap the cover back Into place. @ Note: iris recommended to replace the mat brush every 6-12 months depending on use, 4. Maintaining the Dustin/ Water Tank [2] Open the dust bin and empty contents. Press the dust bin release button and remove the dust bin. CCE f #3 Remove the mop pad to wash and dry in the sun. Remove the primary filter and HEAP filter, wipe down the surface with a dry cloth rouse the cleaning tool. Rinse the primary filter with water and let dry.
5. Maintaining Sensors, Charging Contacts and Unidirectional Wheal 3 Sea damp cloth to clean all sensors an the Robot. 2 i 3 terrycloth clean the ED Remove any trapped hair or debris from charging contacts on the Robot the unidirectional wheel with the {alcohol is not recommended). cleaning brush provided. @ Note: Do net dean the unidirectional wheel with water, 6.
Dust Duct and Filter if the Auto Empty Base indicator it “HF TITHES 6112 12g" is slid green, and the dust bag is not full, iris time to clean the filter and dustiness 8 Sea Philips screwdriver to unscrew the side brush screw and remove the side brushstroke dirt and debris and reinstall using Philips screwdriver, &3 Open the exhaust at the rear of the Lute Empty Base, clean the filter, and al, Dust Cover 5 Fitter reinstall.
Troubleshooting When your Robot encounters a problem, try the solutions below to solve the problem. If the problem persists, contact the Penitence service center for help. Problems Solutions Unable to power on/ start cleaning Please charge before use. This s commonly caused due to low battery. Unable to return to Auto Empty Base + Make sure the Abe Empty Bass is connected to a paws source. « Characterize are too many obstacles near the Auto Empty Base, Please put the base in an open area.
Indicator Definition Solution % + Anemone + Overheating + The covers riot 1. Frequent dust collection leads to fan overheating protection or fan malfunction. it is recommended to try to collect dust after 30 minutes, Flashing red closed properly 2. Ensure that the cover of the Alta Empty Base is completely closed. 1. Check whether the dust hag is IT The dust bag ls not Instated, If not, please install the dust uy installed or installed bag } properly 2.
