To enjoy all available gestures, iris redecorated to control your robot via the Telegenic APP, IMPORTANT TIPS: &. Make sure the robot is on and the robot has enough power. b. Make sure your mobile device is connected to a 2.4GHz WiF, If your router is a dual-band router, please select the 2.4GHz network. on . Make sure you've entered the correct WiFi name and password when con nesting. Avoid using an emoji or special characters or symbols in your WiFi name and password.
WiFi Connection registrar ns meh RNA ale naa Ada fe — ps SII Please select he dvi you purchased . Sn oa chain Sh St Newark configure mode = Fiber Essen, bents i Bras beet Bar srs, tors Re tin ash a Launch the APP, register an account with a valid email address at your first use, then login. Mote: For 8 successful connection, please allow the APP to use your ELAN & Cellulitis Eats when running it. Add device and select the model of your robot.
Add your WF tare rye connect wea ace Ting te connect with the dies: Sana gst a [ET —— [E—— res Select the same router's WiFi and enter the correct password, Go to Settings snd ELAN list to connect to the robot’ s potshot “Lenten-XXRX" Go back to Telegenic APP and complete the WiFi connection. IMPORTANT TIPS: a. Make sure the robot has enough power and the Power Switch of the robot is pressed to ON. b. You have connected the robot to Telegenic APP. ©.
Step 2: Search and select Telegenic Home, then enable it by tapping ENABLE TO USE. Step 3: Enter the email address and password for logging in to the Telegenic APP, then tap Authorize to continue.
Step 1: Launch Google Home APP, then follow the in-app instructions to set up your Google account. Step 2: Tap Settings on the main page, then scroll down to the bottom to tap Works with Google. Step 3: Tap * C1" on the upper right corner, then search and select Telegenic Home. Step 4: Enter the email address and password for logging in to Telegenic APP. Step 5: Tap Link Now and Authorize, it will show you Telegenic Home is linked. Step 6: Follow the instructions to set up the device to finish the settings.
QL, Why cannot the robot connect to WIFI? * Make sure you've entered the right password. * Keep the robot, mobile device and your router being as close as possible. + Make sure you selected a 2.4GHz WiFi, the GHz band is not supported. Q2. Why doses the robot show that it's offline? * Make sure you java switched on the robot and check the network connection of your Mobil device, Q3.
