User`s manual

28 CaptionMaker for Windows
1. Open the CaptionMaker file with time stamps
2. Check only the first box:
Continuously repeat the current CaptionMaker file next time AutoSync is
started
3. Click on AutoSync
Caution Bear in mind that you cannot use true time codes in AutoRepeat mode.
AutoRepeat works only with PC System Timer. As soon as you invoke this option,
your time code reader will be switched to PC System Timer. You must turn this
option off when you are not using this AutoRepeat function. Otherwise you wont be
able to use your desired Time Code Reader.
AutoRepeat one line of text or current time
If you want to display the current time or any desired start time or a line of text repeatedly
you may check the box:
Continuously send user defined data for the interval specified below
Bear in mind that this option does not use any caption file. Even if you have a caption file
opened, the file is not sent out for captions. You invoke this option by clicking on the Start
button at the bottom of the dialog box. You can't use AutoSync, since this option does not use
any caption file with time stamps.
Now you have two choices:
1. Send the current value of time or,
2. Send a line of text.
at a regular fixed time interval.
If you choose: Send current time every interval, and have the item Use real-time clock
instead of Start/Stop times below unchecked as shown below, you will see a display of time
codes starting at 01:00:00:00 at an interval of 1 second (00:00:01:00). The display will
continue according to the Stop time of 01:05:00:00. You may change the Start Time, Stop
Time, Interval and also the Display Mode (Pop-On etc.) to your choice.