Instruction manual

HDE-3000 - 23 -
4) This is the EIA - 708 captions screen. This screen will show captions in there location
relative to a 16:9 screen in HD video.
Note: Screens 2 - 4 will display what is being encoded when the front panel Encode
LED is on. When the Front panel Encode LED is off, screens 2 - 4 will display what is being
decoded from the input video.
4.2 Status Screen
1) This shows the currently selected encoder either Enc 1 or Enc 2. A dual unit will act
as if it is two encoders built in one unit. Nothing will show up here if the unit is a
standard single unit.
2) This shows the current firmware version that the unit is running.
3) This shows the current time code sent to the encoder card.
4) This shows the time code offset that has been set for the encoder card.
5) This shows the new time code which is time code sent to the encoder card ± time
code offset.
6) This shows the format of the video input to the encoder card. If no input is detected
then it will show the format of the black burst that it is generating.
7) This shows the line or field location of the captioning data from the video input of that
encoder card.
8) This shows the job that is running for that encoder card.
9) This shows the current frame rate of the video of that encoder card.
10) This shows either the weather lift or bypass GPI of that encoder card has been
activated.