Instruction manual

HDE-3000 - 22 -
4. HDE3000Remote Window
4.1 Remote Window Screens
Once the 3000 is powered up you will get a window that looks like the one below. This
is the same window that you would use to control the 3000 remotely.
1) This is the Status screen or the setup menus. The Status screen is explained on the
following page. Pressing enter on the front panel or keyboard will bring up the setup
menus. This will also turn on the front panel Setup LED, the setup menus are explained
in the following section.
2) This is the EIA - 608 captions screen. This screen will show captions in there location
relative to a 4:3 screen in SD video.
3) This is the service descriptor screen. This screen shows the EIA - 608 and 708
descriptors that are encoded into the HD SDI stream.