Instruction manual

HDE-3000 - 104 -
Version 1.46
Experimental version not released
Version 1.47
Enhancement: Weather-Lift
A new feature was added to perform “weather-lift”. This feature moves the captions up
on the screen so that they don’t cover weather information placed at the bottom of the screen. A
new menu was added to configure weather-lift:
Enhancement: Optional GPI inputs
A new optional feature is now available: GPI inputs. The new option includes new GPI
connectors at the back of the unit (one for each encoder). Each connector has two GPI inputs
(GPI 1 and GPI 2) providing the following functions; Encoder Weather Lift and Encoder Bypass.
Enhancement: 16 Second Auto-Erase Timers
A new feature was added to automatically erase the VGA caption decoder displays
and/or the open caption decoder display after 16 seconds of inactivity.
Refinement: Open Caption Decoder Issue in 1080P
A bug was corrected that was causing gaps (single video lines) between some of the
rows of captions displayed by the open caption decoder in 1080P (progressive) video.
Refinement: Improved Handling of Missing S352 packets
Some improvements were added to better handle input video that does not contain
SMPTE352M video payload ID packets.
Refinement: Setting Field 2 to “Passthru” with Upstream XDS
A bug was corrected that would make it difficult to set field 2 to “passthru” in the menu
“4.1 EIA-608 SETUP MENU” if the input video contains active XDS information (program rating,
transmission signal identifier, etc.).
Version 1.48
Refinement: 708 Monitor and Open Caption Decoder Issue
An issue was corrected that was causing the 708 decoder to display captions improperly
when Hide Window Command and Display Window Command were being used.
Version 1.49
Refinement: Frame Rate CDP Header Issue
In some cases where the SDI stream had missing or inaccurate SMPTE 352M Video
Payload Identifier (VPID), the HDE-3000 would encode the frame rate in the SMPTE 334-2
Caption Data Packet (CDP) header incorrectly. This would also cause the caption timing to be
incorrect. Now no matter what the VPID is the frame rate in the CPD header will always be
correct along with the caption timing.