User Guide

ULEAD VIDEOSTUDIO USER GUIDE
57
To ensure that the sound volume of captured videos is clear, test
capturing a short video first and use the Source Volume Panel to
adjust the volume level of the analog source while capturing.
After fine tuning the volume, you can start capturing footage from
your analog device. Use the controls on your analog device to scan
your videotape and locate the footage that you want to capture.
Capturing TV footage
VideoStudio allows you to capture TV footage through a TV tuner.
Capture a segment of your favorite television show on regular TV or
cable then save it in your hard drive in AVI, MPEG, or Windows
Media Format.
Note: The Source Volume Panel is not available when you are
capturing from an analog device that has no audio source or a DV
device.
Tip: A delay in capture may be due to the confirmation dialog box or
connection between devices. It is better to rewind your tape to an
earlier point before the actual footage you want to capture and just
trim the video later.