User Guide

ULEAD VIDEOSTUDIO USER GUIDE
26
To capture video and images:
1. Connect your camcorder to your
computer and turn on the device. Set
it to Play (or VTR / VCR) mode.
2. Check if your camcorder is selected in
the Source list.
3. Click the Capture tab in the
VideoStudio Movie Wizard.
4. Select the video file format to use for
saving captured video files from the
Format list. Specify the Capture
folder in which to save the files.
5. Play the videotape in your camcorder, and position the tape on
the part of the video where to start capturing.
6. Click Capture Video to start capturing. Click Stop Capture or
press [Esc] to stop capturing.
7. To capture a still image from the video footage, pause the video
on the desired image then click Capture Image.
Note: Click Options to customize
capture settings specific to your video
device. For details, see “Capturing
video” on page 51.
Tip: If you are capturing video from a DV camcorder, use the
Navigation Panel to play your videotape.