User Guide

ULEAD VIDEOSTUDIO USER GUIDE
11
Checking the hardware setup
After connecting your digital camcorder to the computer, check if
the device is detected by your Windows system. If you installed an
IEEE-1394 card on your computer, check also if the card is
detected.
To check if the IEEE-1394 card and digital camcorder are
detected:
1. Insert your video tape into the
camcorder and switch it on.
Make sure it is in playback
mode (usually named VTR or
VCR). Check your camcorder's
manual for specific instructions.
2. Open the Control Panel, then open System: Hardware -
Device Manager.
3. Make sure the following device names are listed in the Device
Manager.
Under Windows XP or Windows Me:
Connecting a 4-pin to 6-pin IEEE-1394 cable to a desktop computer
Connecting a 4-pin to 4-pin IEEE-1394 cable to a notebook computer