Specifications
Operating Manual MA VPU V 6.0
MA Lighting Technology GmbH Dachdeckerstr. 16 D-97297 Waldbüttelbrunn www.malighting.dePage 150
Nr.
Question
Answer
Check VPU mode
At the moment we get the best results with the
Fullscreen black
Check dongle
dongle.
Check connectivity. No output out of session.
Fullscreen shuts off
Disable the screensaver and power management
Firewalls and Antivirus
Software.
PC looses connection
The MS firewall that comes with SP 2 makes no
problems. After the installation you must allow MA
VPU and onPC the access to the network.
Third party firewalls and anti virus software must be
be disabled or de-installed.
Note that in this case the virus protection etc.
(To configure your firewall enable the Remote Call
TCP Port 7003 in your Firewall Options)
Bad Performance
Disable virus checks on the content files like .AVI;
.IMG or .MOV files!
Change the Device Settings from, RGB Emulation to
HAL: Settings/Options/Driver
Content Browsing from desk
Check the IP-address (same subnet!) and configure
or disable the firewall.
Properties of Hardware Interface - disable
Checksum Offload in the advanced Setting of the
Network Adapter.
Black output screen
- May be your graphics board has too less memory
(64 MB or less) and you are using a high display
resolution (e.g. 1400 *1050).
Reduce the screen resolution.
DMX channels are not patched
Check DMX sheet
Check grandmaster
Check shapers
Dimmer, Grandmaster, Blades closed
3D Object moved out of focus or wrong scaled