User`s guide

Dual Link 8
Dual Link 9
Step 5
Locate an available PCI expansion slot (usu-
ally white/beige in color). This will be in the
area of your computer where other cards that
look similar to the Dual Link card
are installed.
Step 6
Visually confirm that the Dual Link PCI
Card will fit into the available slot you
have chosen.
Step 7
If necessary, remove the knockout on the
back of your computer which corresponds
to the PCI slot you have confirmed as your
selection. If there is a screw, place it in a safe
place as you will be using it to attach the Dual
Link Card.
Step 8
Push the Dual Link PCI Card firmly into the
PCI slot. Apply pressure as needed (but do
not force the card) until the edge connector is
completely in the slot.