User`s guide

Dual Link 14
Dual Link 15
4. In the Device Control dialog box, click the Current device list.
5. Select your device* from the list.
Note: There are many capture card device control options available. The
following is a list of some of the more
common ones:
- MS 1394 Device Control (the default device control for
Windows 98 SE, Windows ME, Windows 2000,
Windows XP)
- TI 1394 Device Control (Windows 98 Gold)
SAVING YOUR MOVIE
Once you have gone through all the steps to create your movie,
CAPTURE, STORYBOARD, EFFECT, OVERLAY, TITLE and AUDIO, you
will come to the finish Step. In the Finish Step you will RENDER ALL of
the VIDEO CLIPS, MUSIC and EFFECTS into one VIDEO file.
CREATING A FINISHED MOVIE
1. Click Finish on the Step Panel.
2. To create a movie file using the settings of the current project
template, click the Create Video File icon and proceed directly to
step 9.
3. To select a movie template to use for creating the movie, click the
arrow button next to the Create Video File icon. Make sure that
the selected template provides proper saving options for creating the
desired movie file. Then proceed directly to step 9.
Note: To check the saving options provided by a movie template, click
the Settings and Commands button then select Make Movie Manager.
4. If there are no suitable templates available, select Custom in the
Create Video File menu.
5. In the ensuing dialog box, select the desired file format for your
movie file.
6. Click the Options button to view and change saving options. Specify
whether you want to save only a portion or the entire project. If you
intend to transfer the movie to videotape later on, adjust the settings
to conform to either NTSC or PAL standards.
7. Click Select to open the Select Preview Image dialog box where you
can choose a frame to represent the file whenever you select it from
a dialog box that supports preview information. (This is only available
for some file formats)
8. Type a subject and a description for the movie, this is optional.
9. Assign a file name and the destination for the file you want to create.
10. Click Save to create (render) the file. After creating the movie, the
movie file is put inside the Video Library.