Instructions / Assembly

08
4. Unscrew and disconnect the propane orifice from the bellows (see Figure 11). Propane orifice (2.21 mm diameter
size) is painted with red mark.
Figure 11
Figure 12
Figure 13 Figure 14
gas valve
natural gas hose
natural gas fixture
natural gas supply
piping system
propane orifice
bellows
5. Replace the propane orifice withs the natural gas orifice and screw the natural gas orifice to the bellows tightly.
Then connect and tighten the natural gas orifice to the inlet tube (see Figure 12). The Natural gas orifice (4.18 mm
diameter size ) is painted with a black mark.
6. Connect the natural gas hose to the gas valve by screwing clockwise tightly (see Figure 13). Plug the natural gas
fixture into the natural gas supply system (see Figure 14). The conversion kit should be CSA certified. Below are
several suggested CSA certified conversion kits for your reference.
(1). Part# DH22 / QH1, manufacturer: KSUN
or (2). Part# WH02 / KJ50A2, manufacturer: Laite
or (3). Part# KJ-3/8G-3/8 / KJ-3/8G, manufacturer: Wanan
The natural gas orifice is included in the package. Please follow the instructions for gas conversion.
natural gas orifice
inlet tube
bellows