Instructions / Assembly

retention point

6. Secure the cylinder by tightening clockwise the retention point found on the tank seat (G), so that the cylinder

cannot move from side to side or fall down (see Figure 6).

NOTE: Fire pit and gas tank must have the minimum distance of 40 inches.

WARNING: Make sure to properly locate the gas hose by keeping it out of pathways where people may tip over

it or in an area where the hose may be subject to accidental damage.

Figure 5

Figure 6

black handle

5. Put the gas tank in the tank seat (G), connect the regulator, screw the black handle clockwise to tighten, turn the

black handle counterclockwise to remove. The hose must point down. The knob on the control panel is turned all

the way to the “OFF” position when the fireplace is NOT in use (see Figure 5).

Figure 7

Once the firepit has cooled completely after use, carefully place the lid (A) onto the fire bowl and use the

weather cover (N) to protect your fire pit from the elements (see Figure 7).

WARNING: Allow 30 minutes after use for fire pit tocool down before placing the lid to prevent scalding.

40 inches