Instructions / Assembly

Figure 2

Figure 4

Figure 3

ASSEMBLY INSTRUCTIONS

Attach the legs (C) with bolt (AA) and washer (CC) in the locations (see Figure 2).

Hardware Used:

AA Bolt (M6 x 15) x 8

CC Washer (M6) x 8

DD Hex screw driver x 1

Carefully unpack all parts from the box, compare parts with package content listed above, make sure all parts are

present before beginning assembly of product. If any part is missing or damaged, do not attempt to assemble the

product. Contact customer service for replacement parts.

Place the Lava rock (F) around the burner (see Figure 4). A gas fire pit requires 13.2 lbs lava rock.

WARNING: keep children away during assembly, as this item contains lava rock, which are small pieces and can

be swallowed by children.

NOTE: leave the pilot box uncovered by lava rock.

CAUTION: this fire pit is equipped with natural lava rock that may crackle or pop the first time it is used. Lava

rock has been pre-heat treated. How ever, in rare cases on first time use, lava rock may pop or burst causing

small pieces of hot rock to fly out of the fire pit. These hot pieces could strike somebody's face during the process

of lighting the fire pit, stay away from the fire pit for the first 20 minutes after igniting.

Attach the Base (D) with bolt (BB) and washer (CC) in the locations (see Figure 3).

Hardware Used:

BB Bolt (M6 x 35) x 4

CC Washer (M6) x 4

DD Hex screw driver x 1

pilot box