User's Manual
Table Of Contents
- User manual
- 幻灯片编号 1
- 幻灯片编号 2
- 幻灯片编号 3
- 幻灯片编号 4
- 幻灯片编号 5
- 幻灯片编号 6
- 幻灯片编号 7
- 幻灯片编号 8
- 幻灯片编号 9
- 幻灯片编号 10
- 幻灯片编号 11
- 幻灯片编号 12
- 幻灯片编号 13
- 幻灯片编号 14
- 幻灯片编号 15
- 幻灯片编号 16
- 幻灯片编号 17
- 幻灯片编号 18
- 幻灯片编号 19
- 幻灯片编号 20
- 幻灯片编号 21
- 幻灯片编号 22
- 幻灯片编号 23
- 幻灯片编号 24
- 幻灯片编号 25
- 幻灯片编号 26
- 幻灯片编号 27
- 幻灯片编号 28
- 幻灯片编号 29
- 幻灯片编号 30
- 幻灯片编号 31
- 幻灯片编号 32
- 幻灯片编号 33
- 幻灯片编号 34
- 幻灯片编号 35
- 幻灯片编号 36
- 幻灯片编号 37
- 幻灯片编号 38
- 幻灯片编号 39
- 幻灯片编号 40
- 幻灯片编号 41
- 幻灯片编号 42
- 幻灯片编号 43
- 幻灯片编号 44
- FCC警告语
29
An introduction to data acquisition system
ESC1 User Manual
Left-click the area you are interested in on the image for
autofocus.
Autofocus function
1. Click on the white balance icon on the
page, the icon starts flashing and enters the
white balance state.
2. Left-click the white area of the image as a
white reference, at this point you can take a
picture.
3. After taking the picture, click on the white
balance icon again to cancel the white balance
mode.
White balance function modes