PatharityTM Smart Camera Model ECS1 User Manual 安装 1
Catalogue General descriptions An introduction to data acquisition system General descriptions 5 Log in software system 23 Icon descriptions 7 Page icon descriptions 25 Safety descriptions 8 Auto focus function 29 White balance function 29 Depth of field overlay 30 Panoramic image stitching function 31 Case list page 32 System update 34 System restart 34 Foreword Congradulations! 10 Standard configuration and optional accessories 11 Instrument overview 12 Assembling Assemblin
Catalogue (continued) Care & Maintenance Troubleshooting Care & Maintenance 36 Spare parts lists 38 Troubleshooting 43 Technical specifications ECS1 40 Dimensions 41 Attention：ECS1 is only used for research purpose.
Version: Chinese V1.0 April 2021 Congratulations on your purchase of the ESC1 Smart Camera, please contact us if you have any questions: info@singularity.
General descriptions ECS1 User Manual General descriptions 5
General descriptions Clean Maintenance Try to keep all optical components clean. Repair work can only be performed by maintenance technicians trained by Qingge If there is thick dust on the surface of the optical components, please use a brush to gently remove the dust before wiping. Medical. Only use accessories designated by Qingge Medical.
Icon descriptions Before using the device, please read and understand this user manual carefully. Important information This icon indicates additional information or explanation.
Safety descriptions If it is not specifically designated for use in diagnostic procedures, do not use ECS1 or its components for this purpose. The instruments and accessories described in this user manual have passed safety and potential hazard tests.
Foreword ESC1 User Manual Foreword 9
Congradulations! Congratulations on your purchase of the Ruiyiming TM smart camera, model ECS1. This document guides you to install and use this product easily. Image display Cloud storage Smart cameras can collect images of different Your ECS1 camera comes with a cloud image resolutions and display them on a high-definition storage space, which can be registered and used monitor to obtain the following resolutions: at the following website: • 1080P: 1920 (H) x1080 (V) 2.21MPixel https://live.
Standard configuration and optional accessories Accessories 1. USB cable, used to connect the camera and the smart Standard configuration computing box 1. ECS1 Microscope Smart Camera 2. Power cord, used to connect the camera 2. Intelligent computing box 3. Power cord, used to connect smart computing box 4. C-mount 0.
Instrument overview 1 6 1. Camera power extension cord jack/power jack 2. USB cable socket, used to connect the camera and the smart computing box 3. Intelligent computing box power jack 4. USB socket, used to connect the camera USB cable 5. Ethernet (Ethernet) CAT-5/CAT-6 wired network interface 2 6. HDMI: shielded, do not use. 7. HDMI: optional, smart computing box 3 HDMI interface.
Assembling ESC1用户手册 装配 13
A must for installation! Installing the camera requires basic tools and local network information. Please prepare the following items before starting the installation: 1) The SSID/Password of the local network (network name and password, you should be able to obtain this information from the IT staff). 2) Use the right tool to remove your original camera (if you have one), and install a new camera and adapter (you may need an Allen key, because some microscopes come with an Allen key tool).
Assembling the camera Assembling The ECS1 camera is connected to the microscope 1. Screw the camera onto the C-mount. through the C-type interface. If you do not have a 2. Screw the camera onto the trinocular head of the microscope suitable interface, please contact our sales using the C-mount from step 1. representative. It is forbidden to directly install the camera with a mismatched adapter to avoid damage to the equipment or lower image quality.
Assembling the camera The angle of the camera and the adapter on the trinocular head of the microscope are very important for the panoramic image stitching screw function. Please adjust the camera by loosening the screw (the screw is the one that installs the adapter on the trinocular microscope) (see the picture on the right, the camera logo is on the front) ).
Assembling intelligent computing box Assembling 1. Use the USB cable to connect the smart box and the camera; The smart computing box is the "brain" of 2. Connect the power cord of the smart computing box, and it will take about 5 minutes to start up for the first run. Please the camera, please place it in a safe and wait for a while. stable location. After the smart computing box is running for a long time, there will be slight heat, which is normal.
Login collection system After the system is assembled, use your computer to capture images, connect to Wifi empath, and access the camera through a browser to capture images: Visit address: http://10.0.0.1:5000 The initial input user name and password are both admin.
Set up smart computing box network (optional) Method 1: Wired network connection When the user needs to use the local external network to access the camera, a smart computing box network needs to be set up. Please insert the network cable into the smart box. Make sure that the network cable can be connected to the external network. It needs to be set after installing/restarting the smart computing box for the first time/after power off.
Set up smart computing box network (optional) If you are using an iphone or other Apple products, the QR code can be identified by the camera that comes with your device. Android system mobile devices need to download the QR code scanning application from its application center (WeChat scanning code is not supported). Method 2: QR code to quickly set up a wireless network (Wifi) connection 1.
Set up smart computing box network (optional) Method 2: QR code to quickly set up a wireless network (Wifi) connection (continued) During the setup process, your device is not allowed to connect to other networks. 2.
Set up smart computing box network (optional) Method 3: Manually set up the wireless network (Wifi) connection After connecting to the network, please contact your IT staff to know the IP address assigned to the camera (it is recommended to ask the IT staff to set a fixed IP). 1. Connect smart box wifi: Use your device (mobile phone/computer/tablet) to open the network settings, find the network empath, enter the password USCAP2020, and connect to the network. 2.
Log in the data acquisition system After setting up the network in any of the above three methods, ask your IT staff to find the IP address assigned to the camera (it is recommended to ask the IT staff to set a fixed IP). After obtaining the IP, use your computer for capturing images, connecting to the network you set up, and accessing the camera through a browser to capture images: Visit address: http://IP:5000 The initial input user name and password are both admin.
An introduction to the data aquisition system ESC1 User Manual Capture images 24
Page icon descriptions Case list: display the collected case images Image acquisition: real-time image acquisition page Add case: add a new case Personal Information: Edit user information Settings: Advanced settings such as system update and restart ESC1 User Manual An introduction to data acquisition system 25
Page icon descriptions (continued) Add case page • Manage slice types: You can add or delete slice types. • Add case: Fill in the pathology number and slice number of the case, and select the slice type to add a case.
Page icon descriptions (continued) Capture image page Name the captured image: • Click the settings icon • Select case: You need to add a case before you can select a case in this position. • Select magnification: refers to the magnification of the microscope objective.
Page icon descriptions (continued) Capture image page： Automatic white balance Take a picture Settings Back to main page Depth-of-field overlay Panoramic image stitching sWSI ESC1 User Manual An introduction to data acquisition system 28
Autofocus function Left-click the area you are interested in on the image for autofocus. White balance function modes 1. Click on the white balance icon on the page, the icon starts flashing and enters the white balance state. 2. Left-click the white area of the image as a white reference, at this point you can take a picture. 3. After taking the picture, click on the white balance icon again to cancel the white balance mode.
Depth of field overlay 1. Drag to set the interval and number of steps. 2. Click the depth-of-field superimposition icon to take a depth-of-field superimposition image. 3. After the depth-of-field superimposed image is completed, the page prompts to notify that the depth-of-field superimposed image has been completed. You can go to the case to view the depth-of-field superimposed image.
sWSI (panoramic image stitching function) 1. Click the icon Before the panoramic image stitching, adjust the condenser to Koehler illumination: After the sample is focused, the aperture is gradually reduced, and the image in the field of view becomes smaller. The picture below shows the adjusted Koller illumination: the bright spot is in the center of the field of view image, and the aperture is sharp. to start panoramic stitching, and slowly move the field of view under the mirror to stitch. 2.
Case list page After the image is collected, click the homepage to return to the case list page. Left-click on a row of cases to enter the case image viewing page.
Case list page Image viewing page, you can slide the mouse wheel or drag the page scroll bar to view all the images in the case. Left-click an image to enter the image viewing page.
Syetem update System restart When the software is connected to the Internet, the Click the system restart icon to restart the smart acquisition system can be upgraded by checking the computing box. new version.
Care and maintenance ESC1用户手册 保养和维护 35
Care and maintenance Care Try to keep all optical components clean. Do not disassemble or replace plugs, optical systems, and mechanical parts, unless specifically permitted and described in the manual. If there is thick dust on the surface of the optical components, please use a brush to gently remove the dust before wiping.
Care and maintenance Dust-proof When the microscope camera is not used for a long time, please cover it with a dust cover (optional accessory). Or place it in a dust-free place. Service Repair work can only be performed by maintenance technicians trained by Qingge Medical. Only spare parts designated by Qingge Medical Company can be used.
Spare parts Number Qingge medical item number Name of spare parts 1 QGPN-CAUSB USB cable, used to connect the camera and the smart computing box 2 QGPN-CAADAP Power cord, used to connect the camera 3 QGPN-ADAP Power cord, used to connect smart computing box 4 QGPN-5XC （optional） C-mount 0.5X interface (optional). For microscopes of different brands and models, please select the corresponding C-mount (0.4X-0.
Technical specifications ESC1 User Manual Technical specifications 39
ECS1 smart camera Camera Weight: 420g (camera only) Sensor: 1/1.7” (7.53 x 5.64 mm) CMOS type Maximum resolution: 12MP Pixel size: 1.85 x 1.
Dimensions Unit：mm ESC1 User Manual Technical specifications 41
Troubleshooting ESC1用户手册 故障排除 42
Troubleshooting When the image acquisition page does not display the field of view under the microscope: Please refresh the page and click the reset all icon. If the view under the lens is still not visible, please restart the camera power extension switch (the camera indicator turns from red to blue to complete the restart), wait five minutes, refresh the page again, and click the reset icon again. If there is no operation for ten minutes, the camera will enter a temporary sleep state.
Contact Us Singularity, Inc. info@singularity.ai www.singularity.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
