Datasheet

UHU plus sofortfest
UHU GmbH & Co. KG - P.O. Box 1552, D-77813 Bühl , Tel. [phone] – Fax. [phone] Internet: www.uhu.de
Technical Data Sheet
Merkblatt
Cleaning:
Traces of adhesive should be removed and apparatus should be cleaned before the adhesive has hardened –
acetone and nitro thinners are suitable solvents for this. The same applies to soiled clothing.
Once it has hardened, the adhesive can only be removed by using the solvent methylene chloride (dichloromethane).
Please make sure that the instructions for using this solvent are followed properly at all times.
Protective precautions:
When using UHU plus sofortfest, care should be taken that the hands are kept clean. After working with the adhesive,
the hands should be cleaned using soap and water – never solvent – as soon as possible. For mass production, the
workplace must be well ventilated. Once hardened, UHU plus is physiologically safe and has no smell or taste.
Package sizes: Tube of binder, tube of hardener, 35g
***
Note:
This information is the result of carefully executed tests. This Technical Data Sheet has been prepared to the best of
our knowledge to provide you with advice when gluing. We cannot be held responsible for the results or any damage
suffered, as the variety of factors involved (type and combination of materials and working method) are beyond our
control. Users have to carry out their own checks and trials. Liability can only be accepted for the consistently high
quality of our product.