Data Sheet

45643 20190303
UHU GmbH & Co. KG 77813 Bühl (Baden) Tel.: [phone] Fax [phone]
www.uhu.com
Note: This information is the result of carefully executed tests. This Technical Data Sheet has been prepared to the best of our knowledge to provide you with advice when gluing. We cannot be held responsible for the
results or any damage suered, as the variety of factors involved (type and combination of materials and working method) are beyond our control. Users have to carry out their own checks and trials. Liability can only be
accepted for the consistently high quality of our product.
Universal strong dUal-component epoxy adhesive
plUs endfest
45643  UHU PLUS ENDFEST 300 BLISTER 33 G DE / FR / GB  45640
TECHNICAL SPECIFICATIONS
Appearance: Binder: Opaque with high viscosity; Hardener: Honey
Coloured with medium viscosity
Chemical base: Binder: Epoxy Resin; Hardener: Aliphatic Amines
Bonding technique: 1-sided application
Consistency: Liquid
Viscosity: approx. 35.000 mPa.s., Liquid
Solid matter: approx. 100 %
STORAGE CONDITIONS
Store cool, dry, frost-free and tightly closed.
Points of attention: Close well after use. For optimum performance it is
important to create a larger amount of adhesive and mix it very well. Curing
time depends on the temperature. Adhesive does not cure below +5°C.
CURE TIMES*
Drying/Curing time: approx. 90 minutes
Final bonding strength after: approx. 12 hours
* Curing time may vary depending on a.o. surface, product quantity used, humidity level and ambient
temperature.
TECHNICAL PROPERTIES
Moisture resistance: Good
Water resistance: Good
Temperature resistance: -40°C - +100°C
UV resistance: Very good
Chemicals resistance: Very good
Paintability: Good
Filling capacity: Very good