Certifications 2

Page 4/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 11.02.2021 Revision: 11.02.2021Version number 4
Trade name: UHU sekundenkleber blitzschnell
(Contd. of page 3)
51.1.22
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
·
Respiratory protection:
Not required.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves
Nitrile gloves with a material thickness of > 0.1 mm (penetration time < 30s).
Protective nitrile rubber gloves according to EN 374 are recommended for prolonged contact.
Material thickness > 0.4 mm
Breakthrough time > 30 minutes
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and
has to be observed.
·
Eye protection:
Safety glasses
Tightly sealed goggles
Goggles recommended during refilling
SECTION 9: Physical and chemical properties
·
9.1 Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Fluid
Colour:
According to product specification
·
Odour:
Characteristic
·
Odour threshold:
Not determined.
·
pH-value:
Not determined.
·
Change in condition
Melting point/freezing point:
Undetermined.
Initial boiling point and boiling range:
60 °C
·
Flash point:
82 °C
·
Flammability (solid, gas):
Not applicable.
·
Decomposition temperature:
Not determined.
(Contd. on page 5)
EU-EN
64371 - UHU sek. bs Pipette Control 3g DE/FR/IT
www.uhu.com 4/8
UHU sek. bs Pipette Control 3g DE/FR/IT