User's Manual

5. Wiring Definiti
Color
Functionality
Description
Red
+12V
+12V power input
Black
GND
GND
Green
D0
Wiegand output D0
White
D1
Wiegand output D1
Blue
LED
LED signal feedback
Yellow
BEEP
Buzzer signal feedback
Gray
Wiegand 34bits
Optional
Note:
If the output format of the card reader you want is Wiegand 34bits, please connect the
Gray wire and the Black wire together.
6.Installation
Remove the back cover from the reader
Drill 2 holes on the wall for the self-tapping screws and 1 hole for the cable
Put the supplied rubber plugs into the 2 holes
Fix the back cover firmly on the wall with 2 self-tapping screws
Thread the cable through the cable hole
Attach the keypad to the back cover
7.Sound and Light Indication
Operation Status
LED Indicator
Buzzer
Standby
Red
Read authorized card
Green
A short beep
Read un-authorized card
Flash red 3 times
3 short beeps