User's Manual

Troubleshooting:
1 Q: Why can't the door be unlocked after I swipe an added card?
A: Please check whether you have set the door open mode to entry by PIN only.
2 Q: Why there is no sound when I press the numeric keypad？
A: Please check whether you have disabled buzzer. If yes, please enable buzzer according to the operation guide.
3 Q: Why there are 3 short beeps when I try to add a card user under programming mode.?
A: This card has been added already.
4 Q: Why isn't the door unlocked when the LED indicator keeps flashing green after I swipe the added card?
A: You have set the door open mode to entry by Card and PIN, please unlock the door by using card and PIN together.
5 Q: How to replace the card which was corresponding to a certain user ID number?
A: Please delete this user ID number firstly and then re-add it.
For a PIN user
Enter the PIN then press #
For a Card user
Read Card
For a Card and PIN user
Read Card (the light will flashes green) then enter PIN #