User's Manual

7 Sound and Light Indication
Operation Status
LED Indicator
Buzzer
Standby
PIN only mode
White
Other mode
Red
Press #
Flash yellow
Press # #
Yellow
In the programming mode
When a menu is waiting to be selected
Flash blue
When a menu has been selected
Blue
Unlock the lock
Green
A short beep
Enter the PIN
Blue
Operation successful
Flash green 1 time
A short beep
Operation failed
Flash red 3 times
3 Short beeps
Press digit key
A short beep
8 Operation Guide
Purpose
Operation
Remarks
To enter the programming
mode
# Admin Password #
The default factory admin password is 123456.
The keypad will exit from the programming mode automatically
if there is no operation in 30 seconds.
To return to previous menu in
programming the mode
#
To exit from the programming
mode
*
Note that the following operations must be done in the programming mode
Basic Operation
To change the
admin
password
0
New Admin Password # Repeat New Admin Password #
The admin password can
be 4-8 digits long.
To add users
1
0 Read Card 1 Read Card 2……Read Card N #
To add card users
1 User ID Number # Read Card #
To add a card user with ID number
2 User ID Number # PIN #
To add or change a PIN user
The user ID number is any 4-digit number from 0001 to 9999.
Users can be added continuously by repeating the operation.
To delete users
2
0 Read Card 1 Read Card 2……Read Card N #
Users can be deleted continuously.
1 User ID Number #
The cards can be deleted when they
are broken or lost.
2 8 digits or 10 digits format card number #
For example, the card number is
0006307890 09616434, and you can
input 0006307890 or 09616434.