User manual

6
CV Description Value range
Factory
default
29
Configuration DCC Standard
Bit 0=0 Normal driving direction
Bit 0=1 Reversed driving direction
Bit 1=0 14 speed steps
Bit 1=1 28 speed steps
Bit 2=0 only digital operation
Bit 2=1 auto digital/analog detection
Bit 5=0 Short Address (CV 1)
Bit 5=1 Long Address (CV 17/18)
Value
0 *
1
0
2 *
0
4 *
0 *
32
0-255 6
32
Index Register for “small” DCC Centers
0 = Help register inactive
1 = CVs 96-99 program CVs 257-260
2 = CVs 96-99 program CVs 261-264
3 = CVs 96-99 program CVs 265-268
4 = CVs 96-99 program CVs 269-272
0-4 0
65
Offset Register
for CV programming with a Motorola Center
0-63 0
66
Page Register
for CV programming with a Motorola Center
0, 4 0
96-99
Index Register for “small” DCC Centers
96 for CVs 257,261, 265, 269
97 for CVs 258,262, 266, 270
98 for CVs 259,263, 267, 271
99 for CVs 260,263, 268, 272
for this the appropriate value must be set in CV32
- -
257
Selection of Operating Mode and Digital Format
Control by locomotive address and special function
Control by locomotive address and speed steps
Control by locomotive address, speed step and direction
Control by one solenoid address with 2 stop positions
Control by two solenoid address with 4 stop positions
DCC operation only
Motorola operation only
Value
1 *
2
3
4
5
64
128
0-255 1
258
Rotation Speed
0-63 10
259
Acceleration delay (Inertia)
0-63 2
260
Decoder Reset
0, 1 0
261
Stop Position 1
0-255 15
262
Stop Position 2
0-255 220
263
Stop Position 3
0-255 100
264
Stop Position 4
0-255 150
265
266
Locomotive special function number
265 = high order byte
266 = low order byte
0-128
0-255
128
1
The factory default values are marked with *.
Guarantee declaration
Each component is tested for its complete functionality before distribution. If a fault should arise within the
guarantee period of 2 years, we will repair the component free of charge upon production of proof of
purchase. The warranty claim is void if the damage was caused by inappropriate treatment.
The trade names mentioned are registered trade marks of the respective companies.
Our contact Details:
Service
In the event of a defect or failure send the unit
together with the invoice and a short
description of the fault back to us for repair.
Hotline
We are available if you have any questions!
Your direct line to a technician:
0 20 45 - 85 83 27
Mon - Tue - Thu – Fri, 14:00~16:00 and Wed 16:00~18:00
Uhlenbrock Elektronik GmbH
Mercatorstr. 6
D-46244 Bottrop
Made in Germany
Electronic devices do not
belong in household rubbish