Installation Guide

Driver Installation

1. Plug the device into the USB port of your PC;

2. Insert the CD into the CD drive of your PC. If the CD-ROM is unavailable on your

computer, you can install the driver via this one:

https://www.mediafire.com/file/rvquzpqkr1adzb5/RTL8812AU.zip/file

3. Double click Setup.exe and run it, and then click the icon “Install Now” to finish

the installation;

4. Once the installation is finished, the software “UGREEN Wi-Fi” will be available,

and you can use it to connect your network.

PAGE 1
Driver Installation 1. Plug the device into the USB port of your PC; 2. Insert the CD into the CD drive of your PC. If the CD-ROM is unavailable on your computer, you can install the driver via this one: https://www.mediafire.com/file/rvquzpqkr1adzb5/RTL8812AU.zip/file 3. Double click Setup.exe and run it, and then click the icon “Install Now” to finish the installation; 4. Once the installation is finished, the software “UGREEN Wi-Fi” will be available, and you can use it to connect your network.