User's Manual

c. Reset the camera with the reset tool
i. Press & hold the reset button for 2 seconds.
ii. If you hear ‘di-di’, press & hold again.
iii. When you hear ‘du~’ &
iv. the indicator light is flashing red quickly (2x / second)
v. you’re in AP mode.
3. Wired mode
a. Plug network cable into the camera's network port.
b. Press & hold the reset button for 2 seconds.
c. When you hear di-di~’ &
d. the indicator light is flashing red slowly (every 2 seconds)
e. you’re in Wired mode
Figure 3
3.1. Wireless mode
Connect camera to Wi-Fi.
2.4G/5G WiFi Support Instructions