User's Manual
1313
10. Remove the Pump Master wire from the terminal (in the irrigation
clock) labeled “P/MV” or “Pump Master” and butt connect it to the
GRAY wire labeled P/MV (V), from the “Valve Bundle” coming from
Base Station #2 (controlling valve stations 7-12).
11. Identify the BROWN wire labeled P/MV (C) from the “Clock Bundle”,
coming from Base Station #1 and attached it to the terminal in the
irrigation clock labeled “P/MV” or “Pump Master” where you removed
the wire in step 10 above.
12. Identify the common wires in the irrigation clock and detach them
from the terminal. Using a wire nut, attach them securely to the
WHITE wires from both base stations labeled COM OUT (V). Attach
the TAN COM IN (C) wires from both base stations to the clock COM
terminal.
13. Finally, connect the AC power according to the directions on page 10 to
ensure proper polarity. Ensure that both RED wires are connected to
the same terminal and both BLACK wires are connected to the same
terminal.