User's Manual

1
Power indicator
2
Receive
(Blinks when a sensor packet is received)
3
Offline
(Repeater will not transmit when lit)
4
Transmit
(Blinks when a sensor packet is transmitted)
5
Select Button
(Pressing the Select button for 3 seconds
stops the repeater from transmitting)
6
DC Terminals
(Terminals for attaching wires from AC/DC
Transformer
Components
FROM
CLOCK
ZONES ZONES
TO
VALVES
UgMO Confidential
The Network Controller User Interface.
On power-up, you’ll see the following screen. This times out after 10 seconds, or press the Select Button to move on.
1 2 3 4 5 6
The major sections:
This catch-all view of the top screen shows the variety of information you may see. There are 6 columns
representing the 6 Zones controlled by the Network Controller. At the top of each column is a description of
the zone control:
. At the very top, left corner, the Network controller indicates whether it is in
‘Automatic’ mode –
where Sensors control watering, or ‘Bypass’ mode, where watering is
always allowed. At the top right is a calculation of average water savings:
4
3
6
5
2
1
SELECT
POWER
RECEIVE
OFFLINE
TRANSMIT
Wireless Repeater
DC