User guide

Universal Fiber Optics
8
MAINTENANCE (Continued)
Disconnect unit from power supply and allow to cool before attempting any
cleaning of the unit.
The body of the unit can be cleaned with a so, damp cloth - do not use any
abrasives on the unit.
The fans and vents should be kept clear by periodically blowing them out with
compressed air.
Non-abrasive glass cleaner can be used to clean the glass lens inside the unit.
CLEANING THE UNIT
Date Maintenance Undertaken
Please note that a record of all maintenance MUST be kept in the table below,
indicating what maintenance was undertaken and when.